How to assemble a draisienne?

You've just received the new draisienne draisienne? Here's how to set it up.

• Time : 10 min
• Level : Easy
• Tools : Cutter | 5 mm Allen wrench

Steps

1. Check the condition of the box, then open it.
   
   
2. If necessary, mount the wheels on the fork and frame. 
   
   
3. Install the handlebars. Locate the direction of rotation of the wheel to ensure that the fork is in the correct position. 
   Probikeshop tip: The direction of rotation of the wheel is indicated by the arrow on the tire.
   
   
4. Insert the plastic spacer into the fork, aligning the opening of the spacer with that of the fork. 
   
   
5. Fit the clamping ring and protective cover.
   
   
6. Finish installing the fork, making sure the fork opening and the clamp opening coincide. Firm but not excessive tightening is achieved using a 5 mm Allen key.
   Probikeshop tip: Make sure the handlebar is centered in relation to the fork.
   
   
7. The handlebars are now installed. All that remains is to adjust the seat height. Using a Allen key 5 mm Allen wrench, loosen the clamp and adjust to the ideal saddle height for your child, again taking care not to exceed the maximum height. Tightening should be firm but not excessive.

You're now ready to assemble your draisienne!