FORWARD JOYRIDE V2 4-Bolt Chainring Silver
Unable to load pickup availability
Description
The Forward Joyride V2 chainring is the upgraded, premium version of the Joyride. The design principle remains the same — a solid billet of 6061-T6 aluminium machined and flat-cut to produce a high-precision component that enhances stiffness and reduces lateral flex — but the finish quality is taken to a whole new level.
The difference is evident in the finish: machined chamfers throughout the entire design, and especially a 12 mm chamfer on the bolt recesses, which significantly improves hardware retention and load distribution during tightening. All this at just 118 g, with a 5 mm thickness and a 4-bolt 104 mm BCD.
The silver finish is the most neutral of the four anodised colours: it showcases the machined chamfers, catching the light along the edges of the design. Available from 35 to 45 teeth. Important mounting note: Forward recommends nuts of at least 6.5 mm length to properly seat into the chamfer — check this before reusing your existing hardware.
Ref: 16086922559868
Key features
Silver Finish: The most neutral of the four colours, highlighting the machined chamfers.
12 mm Chamfer on Chainring Bolt Recesses: Improves bolt retention and stress distribution when tightened.
Fully CNC-Machined 6061-T6 Aluminium: Flat-cut billet for a high-precision component.
Just 118 g: A lightweight design for a 5 mm thick chainring.
Increased Stiffness: Optimised design to reduce lateral flex.
Maximum Range (35 to 45 teeth): From Mini builds to Elite bikes.
Please Note: Minimum 6.5 mm chainring nuts recommended by Forward.
