A good alternative?
"As described. Very easy and quick to assemble. Inspires confidence, to be confirmed over time if better than S. ..."
FSA
FSA PF30 BB30/BB386 Crankset Axle 30mm 68-86.5mm
The bottom bracket FSA BB-PF6000 PF30 is a press fit compatible with all FSA Road and Assault BMX cranksets.It is designed with chromoly cartridge...
Read more
Regular price
37,99 €
Regular price
Sale price
37,99 €
Unit price
per
Couldn't load pickup availability
Description
The bottom bracket FSA BB-PF6000 PF30 is a press fit compatible with all FSA Road and Assault BMX cranksets.
It is designed with chromoly cartridge bearings, and will be fully compatible with Shimano Di2 electronic drivetrains.
It comes with two nylon adjustment washers and a wave spring washer for a perfect, play-free fit.
Compatibility chart
| A - Diameter (mm) | B - Width (mm) | Assembly | Standard |
| 34,8 | 68 | screw-on | BSC / BSA |
| 34,8 | 73 | screw-in | BSC / BSA |
| 34,8 | 83 | screw-in | BSC / BSA |
| 34,8 | 100 | screw-in | BSC / BSA |
| 27 | 95,5 | insert | BB 96 (Trek) |
| 41 | 92 | insert | PF 92 |
| 42 | 68 | insert | BB 30 |
| 42 | 73 | insert | BB 30 |
| 46 | 68 | insert | PF 30 |
| 46 | 73 | insert | PF 30 |
 |
|||
Ref: 7970319794342
Points forts
Compatibility with Shimano Di2 drivetrains.
Attractive price.
Chromoly's robustness.
Caractéristiques
Axis diameter : 30 mm
Case width : 68 mm
Case width : 73 mm
Bearing material : Steel
Shaft type : Through shaft
Housing type : PF30
Informations techniques
Informations prix
*
Overall rating: 4.285714 / 5 from 7 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
5 outlets, crackling and play
"I've had 5 good outings since I got this box. Assembly was easy. But in the long run, it's worthless! I'm getting cracks with every pedal stroke and already a lot of play in the cranks. In short, another 4 5 rides and I'll replace it with a sram".
Value for money ok
"Bought to replace the SRAM that only lasted me a few months... . Cheaper, we'll see if this one lasts longer or shorter."
Good value for money
"I bought this box to replace my tired SRAM Pressfit 30. Less expensive and of a priori equivalent quality, the installation with a Cannondale Hollowgram crankset did not pose any particular difficulty with the adapted tools. Longevity has yet to be assessed, but I'm very satisfied with my purchase so far... ..."
good product
"freshly installed, time will tell!!!"
Perfect
"I bought it to replace the original bearings on my Stumpjumper - very quick and easy assembly - RAS - Top delivery"
Perfect for installation. ... to be seen over time!
"Nice product, very easy to install by going about it delicately. Attractive price. Gives a real facelift to the whole pedal assembly. To be seen over time... ."
