• Frein Arrière SHIMANO XT M8000 J-KIT Sans Disque
  • Frein Arrière SHIMANO XT M8000 J-KIT Sans Disque
  • Frein Arrière SHIMANO XT M8000 J-KIT Sans Disque
  • Frein Arrière SHIMANO XT M8000 J-KIT Sans Disque
  • Frein Arrière SHIMANO XT M8000 J-KIT Sans Disque
1 5
SHIMANO

Rear brake SHIMANO XT M8000 J-KIT Discless

Réf. fabricant : IM8000RRXSA170
The rear brake Deore XT M8000 from SHIMANO offers an exceptional price/performance ratio. It guarantees stable, efficient braking in all weather conditions.   The... Read more

Recommanded price: 149,99 €

139,90 €
139,90 €
View full details

Description

The rear brake Deore XT M8000 from SHIMANO offers an exceptional price/performance ratio. It guarantees stable, efficient braking in all weather conditions.
 
The housing is solidly built and well-ventilated to prevent overheating. The ceramic pistons are formidable and the One-Way bleeding system is very practical.  
The master cylinder features an ergonomic aluminum lever with adjustable stroke. And Servo-Wave technology ensures a short stroke for close contact and excellent responsiveness.
Visit Brake Pads IceTech are ventilated to optimize cooling. 
 
An excellent choice for all-round use.

Ref: 7977571516582

Points forts

Short-stroke Servo Wave mechanism;

Easy guard adjustment;

Single-outlet bleed system for easy maintenance;

Compatible with I-Spec systems: a single clamp for brake lever and shifter.

Caractéristiques

Model year : 2016

Color : Black

Disc : Not supplied

Brake fluid : Mineral

Hose length : Rear 170 cm

Lever material : Aluminum

Brake Pads Organic : Brake Pads Organic

Practice : All Mountain

Practice : Cross Country

Caliper type : 160 PM Rear

Hose type : Standard

Brake type : Rear

Informations techniques

One Way Bleeding system;
Individual lever ;
SM-BH90-SBM hose;
I-Spec II mounting ;
Brake delivered bled and ready for use;
Brake Pads ventilated IceTech.

Installation of J-Kit brakes:
- Position your brake lever on the handlebar of the bike
- Mount your brake caliper on the fork and/or frame
- Route the brake hose through the internal passage in your frame (if your bike is so equipped).
- Remove the black rubber plug from the end of the hose
- Remove the yellow end caps from the brake levers.
- Slide the black rubber nut cover over the hose
- Do not remove the small white cap from the end of the hose.
- Insert brake hose into lever nut
- Keeping the hose at the bottom of the lever nut, tighten the nut to compress the olive inside the lever. There's no need to overtighten, as the nut thread should remain visible, and is then masked by the nut cover you slid over the hose earlier.
- Now you can operate the brake to finalize its installation.

PM = Postmount
IS = International Standard Mounting
If the spacing between the two caliper mounting bolts (on frame or fork) is 74mm, this corresponds to a PM mounting. If the spacing is 51mm, it's an IS mounting.

Informations prix

Recommended retail price February 2024