• VAR extractor for Shimano Press Fit
1 1
VAR

VAR extractor for Shimano Press Fit

The VAR bowl extractor for easy removal of cuvettes from housings Press Fit with or without an inner cover ("tunnel"). The tool is quick... Read more
42,99 €
42,99 €
View full details

Description

The VAR bowl extractor for easy removal of cuvettes from housings Press Fit with or without an inner cover ("tunnel").

The tool is quick and easy to install through the bottom bracket, and is ideally used with a double-sided hammer.
 

Ref: 7970459680934

Caractéristiques

Tool type : Extractor

Informations techniques

Shimano gearbox compatible Press Fit BB86, BB90, BB92, Sram Press Fit GXP, RaceFace Press Fit and other brands with 23 or 24 mm axles
Weight (manufacturer): 204 g
;

Informations prix

*Recommended retail price February 2024

Overall rating: 4.3125 / 5 from 32 reviews.

AI Generated Review Summary

The VAR extractor for Shimano Press Fit is highly regarded for its quality and reasonable price, though it is not suitable for GXP Pressfit bottom brackets with 24 mm bearings on the drive side.

Summary topics

  • Compatibility with GXP Pressfit: 23%
  • Extractor Quality and Price: 15%

Review topics: ["quality", "price", "tool", "extractor", "use", "bearings", "cup", "case", "meets", "removal"].

Review highlights

  • "Very good extractor, it does the job." — Lolomarhelo
  • "Perfectly meets my needs, neat finish." — Papadavid42
  • "An indispensable tool for removing a press-fit casing from the frame." — Seb72

Reviews

The tool for hunting bowls

"The tool for hunting shimano pressfit cups. Can also extract headset cups, but with a little caution on holding in place before striking."

— Sylvain P. (5/5)

Mitigated

"Average experience. If the cages are seized, the tool is not rigid enough".

— Jfp32 (5/5)

very good extractors

"very good and quick and easy crankset removal".

— Tyremy22 (5/5)

extractor unsuitable for stubborn housings

"Very complicated to extract with this extractor. In the end I had to use a threaded extractor."

— Gromu (2/5)

very good

"Bought to disassemble Pressfit bearings ,,I started by tapping with a mallet ,,OUPS Bearing locked . . A savoir home trainer bike with bearings that had 30000-40000 kms subjected to sweating ,,despite a careful cleaning I used the hammer ,,the tool suffered no damage ,robust ,nothing to say does the job"

— Romeo76 (5/5)

A good extractor!

"A few blows with a hammer are all that's needed to extract the ring ... if the result is not achieved, then the crowbar, or a tire iron, will make a good lever for it! Of course, the ring is then "good" to throw away!"

— Janro (5/5)

Perfect for maintenance of PressFit housings

"After DIY extraction sessions, this extractor is child's play".

— Nominoe37 (5/5)

also does the job for Sram!

"Also works for extracting a Press Fit Sram GXP".

— Cedec21 (4/5)

Nickel

"Meets my needs perfectly, neat finish."

— Papadavid42 (5/5)

Bottom bracket extractor

"Good for extracting 24 diameter case, you have to tap like a deaf man with the mallet but no damage to the bike."

— Kilian74 (4/5)

Q&A